Umatshini wokuvavanya i-electronic torsion

Kufanelekile ukuvavanya ukusebenza kwe-tensile kunye ne-torsional yamantongomane okutshixa okuphezulu.Umxholo wokuvavanya uquka ukutshixa i-torque, ukucima i-torque, ukuqinisa amandla kunye nokukhulula i-torque, njl.i-torque ekhululayo ibhekisela kwi-torque ejikelezayo phantsi komthwalo we-axial, oko kukuthi, ubuninzi okanye ubuncinci be-torque kwindawo ye-screw-out, kunye nommandla wesampuli unokumiselwa.Iiparamitha ezinje ngepharamitha iyonke yokukhuhlana µtotali, iparamitha yokukhuhlana komsonto µumsonto, isiphelo se-coefficient yobuso µi-endface, kunye nomlinganiso wokuqinisa u-K unokufunyanwa.

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Iimpawu zemveliso

测试机器类型	EHLN-5504-202型	EHLN-5205-502型	EHLN-5505-203型
最大拉力 (kN)	50	200	500
最大扭矩 (Nm)	200	500	2000
测量范围	0.2 至 100%
测量准确性	优于指示值±1%,±0.5%
速度范围(./分钟)	0.01~360（可扩展至720）或非标定制
张力、扭矩分辨率	未分级和恒定分辨率 ±1/300000FS（满量程）
螺栓规格 (mm)	M3 至 12	M6 ~ 20	M8 ~ 32
螺栓长度(毫米)	20 ukuya kwi-100	20 ~ 150	40 ~ 200
主机电机功率 (千瓦)	1.0 KW	2.OKW	3.OKW

Umgangatho wokuvavanya umatshini

1. Umatshini wokuvavanya wenziwe ngokwe-JB / T 9370-1999 "Iimeko zeTechnical Conditions for Torsion Testing Machines".

2. Umatshini wokuvavanya usekelwe kwi-GB/T10128-1998 "I-Metal Room Temperature Test Method Test", i-GJB715.13 "Indlela yokuHlola kwangaphambili yokuFakela iFasteners eFakelweyo", i-MIL-STD-1312, i-Test16 "Indlela yokuHlola kwangaphambili" kunye neminye imigangatho. Yenza imifuniselo ukunika idatha.

3. Umatshini wokuvavanya unokuphinda wenze iimvavanyo kwaye unike idatha ngokwemigangatho yaseYurophu efana ne-EN-14399-1: 2005, EN-14399-3～6: 2006 kunye ne-ISO 898-1: 1999.